Outdoor Lighting Support & Service

Lights acting up? Need a spec sheet? Planning a project and not sure where to start? This is the place.

Every MINGHUI fixture goes through our lab before it ships. And if something goes wrong after installation, our team has your back. Most issues get resolved in under 10 minutes. For the rest, we respond within 2 hours.

Average response time: 47 minutes. 98% of issues resolved on first contact.

Self-Service Outdoor Lighting Support

Tell us what’s going on. We’ll point you to the right fix.

My lights aren’t working

Flickering, dimming, or completely dead? Most problems come down to three things: transformer load, loose connections, or wire gauge. Our troubleshooting guide walks you through each one step by step.

Start troubleshooting (/faq)

I need specs, manuals, or certifications

IES files, wiring diagrams, UL certificates. They’re all in our document center, organized by product line so you don’t have to dig.

Browse documents (/document-download)

I need warranty service

Every MINGHUI fixture comes with a 5-year warranty. File a claim online and we’ll get back to you within 2 hours. Most replacements ship within 48 hours.

Start a warranty claim (/warranty)

I’m planning a new project

Custom beam angles, special finishes, photometric layouts. Tell us what you need and an engineer will work with you from concept to installation.

Request a custom solution (see Section 4)

Quick Fixes You Can Try Right Now

Most outdoor lighting problems have simple solutions. Grab a screwdriver and try these before calling us.

Lights flickering or dimming

This usually means your transformer is overloaded or a connection came loose.

Three things to check:

  • Make sure your transformer’s wattage is at least 20% higher than your total fixture load. If you’re running 80W of lights on an 80W transformer, that’s your problem.
  • Check every wire connection. Outdoor connectors should be filled with waterproof gel. If they’re dry, replace them.
  • Using a dimmer? Most LED drivers need an MLV (magnetic low-voltage) dimmer. ELV dimmers cause flickering with LED loads.

Still flickering after checking all three? Read the full troubleshooting guide (/faq).

Timer or photocell not working

Try this first: cover the photocell sensor with your hand for 10 seconds, then let go. The lights should turn on. If they don’t, the sensor may need replacing.

For timer issues, disconnect power for 30 seconds and reconnect. Then reprogram your schedule. Also check that the photocell isn’t blocked by a tree branch or a nearby light source.

Need a visual walkthrough? Watch the timer setup video (/document-download).

Only some lights are on

This is almost always voltage drop. Your wire run is too long for the gauge you’re using.

Here’s the rule of thumb:

  • 12AWG wire: max 200 ft total run
  • 14AWG wire: max 100 ft total run
  • If your run goes past these limits, switch to a multi-tap transformer or split the run into separate circuits.

Wire sizing calculator & guide (/faq)

Manual Support Channel

Emergency Contact Information

Email: ali@minghuiled.com

WhatsApp:+86-15031321436

Service Time Commitment

Outdoor Lighting Support Time: Within 2 hours

Minghui Lighting outdoor lighting support with 2hrs

Warranty & Returns

We stand behind what we make. Here’s what that means in practice.

Coverage

Details

Warranty period

5 years on all fixtures. 3 years on transformers.

What’s covered

Manufacturing defects, LED failure, driver malfunction, finish degradation.

What’s not covered

Physical damage from impacts, improper installation, lightning strikes.

How to claim

Submit online. We review within 2 hours. Replacement ships within 48 hours.

 

Returns are straightforward. Within 30 days of purchase, no restocking fees, no questions.

Start a warranty claim (/warranty)

Custom Outdoor Lighting Support for Contractors & Designers

Every project is different. We don’t do one-size-fits-all.

What we can do:

  • Custom beam angles from 15 to 60 degrees, or anything between
  • Special finishes matched to your RAL color spec
  • Free photometric planning with IES files and layout simulations
  • OEM and ODM for large projects
  • One dedicated engineer from quote to completion. No passing you around.

Typical turnaround:

  • Qute: 24 hours
  • Samples: 5 to 7 business days
  • Prduction: 2 to 4 weeks depending on volume

Tell us about your project (see Contact section)

Frequently Asked Questions

Q: How long do MINGHUI outdoor lights last?

A: Our LED fixtures are rated for 50,000+ hours. At 10 hours per night, that’s over 13 years. Most of our customers get 10 to 15 years out of them.

A: Yes. All our 12V low-voltage systems are designed for DIY. Every order comes with a step-by-step guide, and our document center has video tutorials for each product line.

A: We do. Send us your project details — area size, the look you’re going for, your budget — and our engineers will put together a custom lighting plan at no charge.

A: For most residential jobs, 12AWG is the safe choice. It handles runs up to 200 ft without significant voltage drop. For shorter runs under 100 ft, 14AWG works fine. See our wire sizing guide (/faq) for the full breakdown.

A: All outdoor fixtures are rated IP65 or higher. That means they handle rain, snow, and hose spray without issue. Submersible lights are rated IP68.

Contact Our Outdoor Lighting Support Team

We respond within 2 hours during business hours. Emails sent after hours get answered first thing the next business day.